dmesg - 2012-01-03 20:27
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-13-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #22~lucid1-Ubuntu SMP Thu Nov 3 14:46:55 UTC 2011 (Ubuntu 3.0.0-13.22~lucid1-server 3.0.6)
[ 0.000000] Command line: root=/dev/vda1 ro console=ttyS0,115200n8 console=tty1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fffd000 (usable)
[ 0.000000] BIOS-e820: 000000003fffd000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Joyent SmartDC HVM, BIOS Bochs 01/01/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3fffd max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000fdbe0] fdbe0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000003fffd000
[ 0.000000] 0000000000 - 003fe00000 page 2M
[ 0.000000] 003fe00000 - 003fffd000 page 4k
[ 0.000000] kernel direct mapping tables up to 3fffd000 @ 3fffa000-3fffd000
[ 0.000000] RAMDISK: 37726000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fdb90 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000003fffdc00 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000003ffffe30 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000003fffde00 01FB7 (v01 BXPC BXDSDT 00000001 INTL 20090123)
[ 0.000000] ACPI: FACS 000000003ffffdc0 00040
[ 0.000000] ACPI: SSDT 000000003fffdd60 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000003fffdc80 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000003fffdc40 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fffd000
[ 0.000000] Initmem setup node 0 0000000000000000-000000003fffd000
[ 0.000000] NODE_DATA [000000003fff5000 - 000000003fff9fff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0003fffd
[ 0.000000] On node 0 totalpages: 262024
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3528 pages used for memmap
[ 0.000000] DMA32 zone: 254517 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:beffc000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003fc00000 s79680 r8192 d22720 u2097152
[ 0.000000] pcpu-alloc: s79680 r8192 d22720 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258435
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/vda1 ro console=ttyS0,115200n8 console=tty1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1008940k/1048564k available (6170k kernel code, 468k absent, 39156k reserved, 6950k data, 904k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2399.606 MHz processor.
[ 0.088010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.21 BogoMIPS (lpj=9598424)
[ 0.096020] pid_max: default: 32768 minimum: 301
[ 0.100051] Security Framework initialized
[ 0.104046] AppArmor: AppArmor initialized
[ 0.108017] Yama: becoming mindful.
[ 0.112273] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.116580] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.120914] Mount-cache hash table entries: 256
[ 0.124319] Initializing cgroup subsys cpuacct
[ 0.128024] Initializing cgroup subsys memory
[ 0.132064] Initializing cgroup subsys devices
[ 0.136023] Initializing cgroup subsys freezer
[ 0.140023] Initializing cgroup subsys net_cls
[ 0.144021] Initializing cgroup subsys blkio
[ 0.148071] Initializing cgroup subsys perf_event
[ 0.152218] Disabled fast string operations
[ 0.156048] mce: CPU supports 10 MCE banks
[ 0.160306] SMP alternatives: switching to UP code
[ 0.221901] Freeing SMP alternatives: 24k freed
[ 0.224041] ACPI: Core revision 20110413
[ 0.232073] ftrace: allocating 24641 entries in 97 pages
[ 0.242568] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.285544] CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 0.296032] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
[ 0.304362] Brought up 1 CPUs
[ 0.308026] Total of 1 processors activated (4799.21 BogoMIPS).
[ 0.316064] devtmpfs: initialized
[ 0.324778] print_constraints: dummy:
[ 0.328333] Time: 20:03:40 Date: 01/03/12
[ 0.332122] NET: Registered protocol family 16
[ 0.336286] ACPI: bus type pci registered
[ 0.340284] PCI: Using configuration type 1 for base access
[ 0.345908] bio: create slab at 0
[ 0.353084] ACPI: EC: Look up EC in DSDT
[ 0.356711] ACPI: Interpreter enabled
[ 0.360029] ACPI: (supports S0 S3 S4 S5)
[ 0.368033] ACPI: Using IOAPIC for interrupt routing
[ 0.379815] ACPI: No dock devices found.
[ 0.384030] HEST: Table not found.
[ 0.388034] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.396082] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.400147] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.400152] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.400156] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.400161] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 0.400314] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.404563] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.406362] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.407439] pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f]
[ 0.408232] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[ 0.409399] pci 0000:00:01.2: reg 20: [io 0xc020-0xc03f]
[ 0.410146] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.411775] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.417020] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.424538] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[ 0.432261] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[ 0.440252] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff]
[ 0.480283] pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref]
[ 0.481790] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[ 0.484460] pci 0000:00:03.0: reg 10: [io 0xc040-0xc05f]
[ 0.484745] pci 0000:00:03.0: reg 14: [mem 0xf2020000-0xf2020fff]
[ 0.486145] pci 0000:00:03.0: reg 30: [mem 0xf2030000-0xf203ffff pref]
[ 0.487010] pci 0000:00:04.0: [1af4:1000] type 0 class 0x000200
[ 0.487506] pci 0000:00:04.0: reg 10: [io 0xc060-0xc07f]
[ 0.487790] pci 0000:00:04.0: reg 14: [mem 0xf2040000-0xf2040fff]
[ 0.489229] pci 0000:00:04.0: reg 30: [mem 0xf2050000-0xf205ffff pref]
[ 0.490088] pci 0000:00:05.0: [1af4:1001] type 0 class 0x000100
[ 0.490582] pci 0000:00:05.0: reg 10: [io 0xc080-0xc0bf]
[ 0.490868] pci 0000:00:05.0: reg 14: [mem 0xf2060000-0xf2060fff]
[ 0.493367] pci 0000:00:06.0: [1af4:1001] type 0 class 0x000100
[ 0.493854] pci 0000:00:06.0: reg 10: [io 0xc0c0-0xc0ff]
[ 0.494158] pci 0000:00:06.0: reg 14: [mem 0xf2061000-0xf2061fff]
[ 0.497170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.498538] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.512418] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.519341] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.525146] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.532213] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.541304] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.548301] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.552046] vgaarb: loaded
[ 0.556040] vgaarb: bridge control possible 0000:00:02.0
[ 0.560685] SCSI subsystem initialized
[ 0.564483] libata version 3.00 loaded.
[ 0.564756] usbcore: registered new interface driver usbfs
[ 0.568085] usbcore: registered new interface driver hub
[ 0.572178] usbcore: registered new device driver usb
[ 0.576429] PCI: Using ACPI for IRQ routing
[ 0.580055] PCI: pci_cache_line_size set to 64 bytes
[ 0.580586] reserve RAM buffer: 000000000009bc00 - 000000000009ffff
[ 0.580595] reserve RAM buffer: 000000003fffd000 - 000000003fffffff
[ 0.580961] NetLabel: Initializing
[ 0.584048] NetLabel: domain hash size = 128
[ 0.587185] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.588078] NetLabel: unlabeled traffic allowed by default
[ 0.592206] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.600164] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.609577] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.620306] Switching to clocksource hpet
[ 0.627618] Switched to NOHz mode on CPU #0
[ 0.647164] AppArmor: AppArmor Filesystem Enabled
[ 0.651660] pnp: PnP ACPI init
[ 0.654924] ACPI: bus type pnp registered
[ 0.658307] pnp 00:00: [bus 00-ff]
[ 0.658313] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.658318] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.658322] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.658325] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.658328] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 0.658391] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.658452] pnp 00:01: [io 0x0070-0x0071]
[ 0.658537] pnp 00:01: [irq 8]
[ 0.658540] pnp 00:01: [io 0x0072-0x0077]
[ 0.658576] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.658622] pnp 00:02: [io 0x0060]
[ 0.658624] pnp 00:02: [io 0x0064]
[ 0.658661] pnp 00:02: [irq 1]
[ 0.658711] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.658775] pnp 00:03: [irq 12]
[ 0.658811] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.658853] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.658857] pnp 00:04: [io 0x03f7]
[ 0.658916] pnp 00:04: [irq 6]
[ 0.658920] pnp 00:04: [dma 2]
[ 0.658977] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.659178] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.659230] pnp 00:05: [irq 4]
[ 0.659270] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.660375] pnp 00:06: [io 0x02f8-0x02ff]
[ 0.660412] pnp 00:06: [irq 3]
[ 0.660453] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.660477] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.660535] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.660888] pnp: PnP ACPI: found 8 devices
[ 0.665518] ACPI: ACPI bus type pnp unregistered
[ 0.675812] PCI: max bus depth: 0 pci_try_num: 1
[ 0.675833] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.675836] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
[ 0.675917] NET: Registered protocol family 2
[ 0.679403] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.684642] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.691965] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.698907] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.702868] TCP reno registered
[ 0.705470] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.709742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.714569] NET: Registered protocol family 1
[ 0.718237] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.724521] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.730107] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.735874] pci 0000:00:02.0: Boot video device
[ 0.736164] PCI: CLS 0 bytes, default 64
[ 0.737178] Trying to unpack rootfs image as initramfs...
[ 0.743432] audit: initializing netlink socket (disabled)
[ 0.748528] type=2000 audit(1325621019.748:1): initialized
[ 0.880691] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.900553] VFS: Disk quotas dquot_6.5.2
[ 0.904581] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.924288] fuse init (API version 7.16)
[ 0.928436] msgmni has been set to 1970
[ 0.952548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.968257] io scheduler noop registered
[ 0.974164] io scheduler deadline registered (default)
[ 0.980706] io scheduler cfq registered
[ 0.998740] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.003613] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.011434] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.018047] ACPI: Power Button [PWRF]
[ 1.022067] ACPI: acpi_idle registered with cpuidle
[ 1.023618] ERST: Table is not found!
[ 1.037341] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.043044] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[ 1.049842] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 1.060552] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 1.065138] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[ 1.073469] virtio-pci 0000:00:04.0: setting latency timer to 64
[ 1.088648] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 1.093036] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 1.101785] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 1.116660] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 1.120505] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
[ 1.125881] virtio-pci 0000:00:06.0: setting latency timer to 64
[ 1.182146] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.233468] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.288001] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.339375] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.345225] Linux agpgart interface v0.103
[ 1.350294] brd: module loaded
[ 1.353709] loop: module loaded
[ 1.357649] virtio-pci 0000:00:05.0: irq 40 for MSI/MSI-X
[ 1.357738] virtio-pci 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.600277] vda: vda1
[ 1.604801] virtio-pci 0000:00:06.0: irq 42 for MSI/MSI-X
[ 1.604858] virtio-pci 0000:00:06.0: irq 43 for MSI/MSI-X
[ 1.612241] vdb: vdb1
[ 1.615141] ata_piix 0000:00:01.1: version 2.13
[ 1.615370] ata_piix 0000:00:01.1: setting latency timer to 64
[ 1.620568] scsi0 : ata_piix
[ 1.628350] scsi1 : ata_piix
[ 1.630677] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 1.636490] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 1.641277] Fixed MDIO Bus: probed
[ 1.644988] PPP generic driver version 2.4.2
[ 1.648788] tun: Universal TUN/TAP device driver, 1.6
[ 1.651902] tun: (C) 1999-2004 Max Krasnyansky
[ 1.656382] virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
[ 1.656438] virtio-pci 0000:00:03.0: irq 45 for MSI/MSI-X
[ 1.656493] virtio-pci 0000:00:03.0: irq 46 for MSI/MSI-X
[ 1.659011] virtio-pci 0000:00:04.0: irq 47 for MSI/MSI-X
[ 1.659079] virtio-pci 0000:00:04.0: irq 48 for MSI/MSI-X
[ 1.659141] virtio-pci 0000:00:04.0: irq 49 for MSI/MSI-X
[ 1.660704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.667805] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.672119] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.677026] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[ 1.682300] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 1.682334] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.685956] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 1.691261] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c020
[ 1.695628] hub 1-0:1.0: USB hub found
[ 1.979729] hub 1-0:1.0: 2 ports detected
[ 1.986758] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.001105] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.008489] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.016714] mousedev: PS/2 mouse device common for all mice
[ 2.025819] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.034980] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 2.043553] device-mapper: uevent: version 1.0.3
[ 2.050548] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.061003] cpuidle: using governor ladder
[ 2.068240] cpuidle: using governor menu
[ 2.072621] EFI Variables Facility v0.08 2004-May-17
[ 2.078555] TCP cubic registered
[ 2.084467] NET: Registered protocol family 10
[ 2.093904] NET: Registered protocol family 17
[ 2.103247] Registering the dns_resolver key type
[ 2.110304] PM: Hibernation image not present or could not be loaded.
[ 2.110326] registered taskstats version 1
[ 2.122168] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.166380] Freeing initrd memory: 9000k freed
[ 2.195916] Magic number: 12:826:92
[ 2.203716] rtc_cmos 00:01: setting system clock to 2012-01-03 20:03:42 UTC (1325621022)
[ 2.215127] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.224481] EDD information not available.
[ 2.345248] usb 1-1: new full speed USB device number 2 using uhci_hcd
[ 2.352761] ata2.01: NODEV after polling detection
[ 2.353946] ata2.00: ATAPI: QEMU DVD-ROM, 0.14.1, max UDMA/100
[ 2.365811] ata2.00: configured for MWDMA2
[ 2.376453] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.14 PQ: 0 ANSI: 5
[ 2.397757] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 2.404289] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.410459] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.410540] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.424166] Freeing unused kernel memory: 904k freed
[ 2.432312] Write protecting the kernel read-only data: 12288k
[ 2.443645] Freeing unused kernel memory: 2004k freed
[ 2.478676] Freeing unused kernel memory: 1400k freed
[ 2.537312] udev: starting version 151
[ 2.537406] udevd (78): /proc/78/oom_adj is deprecated, please use /proc/78/oom_score_adj instead.
[ 2.888480] FDC 0 is a S82078B
[ 2.984738] input: QEMU 0.14.1 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
[ 2.994571] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.14.1 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 3.008308] usbcore: registered new interface driver usbhid
[ 3.014746] usbhid: USB HID core driver
[ 3.120673] Switching to clocksource tsc
[ 7.981141] EXT3-fs: barriers not enabled
[ 7.986824] kjournald starting. Commit interval 5 seconds
[ 7.993715] EXT3-fs (vda1): mounted filesystem with ordered data mode
[ 8.759567] udev: starting version 151
[ 8.788216] EXT3-fs (vda1): using internal journal
[ 8.809752] lp: driver loaded but no devices found
[ 8.905879] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 9.024934] EXT4-fs (vdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.762208] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 19.872421] eth0: no IPv6 routers present
[ 20.336297] eth1: no IPv6 routers present